Hospitals, healthcare facilities, and clinics
Address serious incidents of incivility and reassure your staff at your hospital or healthcare facility.
Improve performance and streamline the handling of reports of anti-social behavior
To support French hospitals and their staff, MY KEEPER has streamlined the alert management process for serious incidents involving patients, visitors, and hospital staff. The solution is fully compatible with your facility’s specific security plan.
Flexibility: Configuration changes can be made at any time to ensure your safety is always a top priority
Speed: Automating the alert chain to save time in the event of an attack on staff, acts of incivility, or a major incident
Simplicity: No security knowledge is required to use My Keeper
Much more than an alert...
Optimize your responsiveness in emergencies
Assault Alert
A fall. Prolonged immobility. Loss of verticality.
An alert is sent automatically.
Manual Alert
In an emergency, pressing and holding the SOS button on the Athena+ beacon triggers your fully customized alert chain.
Reassure your employees
Give your employees peace of mind by providing them with a panic button. Relieve them of responsibility by opting for remote management. With our system, situations are assessed in real time, ensuring a rapid and appropriate response at every critical moment.
Deploy your system in less than an hour!
We offer a quick and easy deployment of our solution, which is extremely user-friendly. We guarantee a mobile alert system that is 100% connected and has no distance limitations across the entire country, even in areas with no cellular coverage.
Delegate alerts 100%
Our certified remote assistance service is available 24/7. In case of an emergency, you’ll have access to real-time two-way communication for an immediate assessment of the situation. Choose our versatile alert system, which sends SMS messages, phone calls, and emails to pre-registered contacts as soon as an alert is triggered.
Ensure a rapid and appropriate response at every critical moment. Additionally, our system records all interactions, providing valuable documentation that can be used in court.
Community Assistance
Depending on the type of alert, our system can be configured to trigger a first-level alert, notifying nearby managers and allowing them to validate the alert. This flexibility enables you to tailor your devices’ response based on the context and strategy you have defined in advance.
Thanks to our intelligent controller, you can easily distinguish between a triggered alert and a confirmed alert, ensuring an appropriate response in all circumstances.
A free management interface. Really!
Get a free management and alert interfaceas soon as you purchase your first device. Our automatic weekly reports let you check the operational status of your equipment with complete peace of mind.
A product line designed for hospitals
SecurIT is a comprehensive, reliable, and adaptable security solution designed to effectively meet the specific needs of each profession.
SOS button
Audible alarm
IP67 protection rating: water and dust resistance
Athena+ beacon
The ATHENA+ beacon is a powerful communication center that automates the chain of events for triggering alerts and broadcasting alarms.
IT IS EQUIPPED WITH:
- with an alert button that makes it easy to use and intuitive
- a sound diffuser so that the alert can be heard everywhere
- 8 programmable alert tones
- a SIM card for unlimited communication (subscriptions included)
- a call button to a predefined number (e.g., on-call service, municipal police)
- audio verification & cascading calls
- a rechargeable battery with 72 hours of battery life
Available
90 dB audible alarms
Programmable RGB LEDs
Built-in speakers and microphone
Hestia+ siren
HESTIA+ sirens function like beacons. They are devices that emit audible and visual alerts.
It is also possible to communicate via sirens. They have a backup battery with 72 hours of autonomy.
The siren broadcasts spoken alert messages such as:
- Intrusion alert
- Safety Information
- All clear
- Lockdown alert
- Evacuation alert
IT IS EQUIPPED WITH:
- 8 programmable sounds available
- the choice of color for the flashing lights
- audio verification & cascading calls
Coming soon
The final design may vary before it becomes available. Image not contractually binding.
Audible alarm 100 to 115dB
Blue flashing light
Artemis+ siren
Designed for outdoor use, ARTÉMIS+ sirens work in the same way as Athena+ beacons and Hestia+ sirens. They are interconnected with indoor manual triggers and Athena+ beacons. They are light and sound diffusers (110 dB). They have a backup battery with 72 hours of autonomy.
The siren broadcasts spoken alert messages such as:
- Intrusion alert
- Safety Information
- All clear
- Lockdown alert
- Evacuation alert
IT IS EQUIPPED WITH:
- 8 programmable sounds available
- a bright blue flash
- a built-in speaker
- IP67 protection rating: water and dust resistant
Coming soon
The final design may vary before it becomes available. Image not contractually binding.
Button No. 4
Button No. 2
Button No. 1
Button No. 3
LCD screen
Hermes Screen
The HERMES screen is connected to the HESTIA+ siren.
It is equipped with four buttons that trigger specific PPMS alert scenarios (e.g., button 1: Attack alert; button 2: Chemical containment alert; button 3: Fire alert; button 4: End of alert).
The screen can also display a scrolling text message to provide information about the type of alert triggered, the location where it was triggered, or to broadcast alert instructions.
Examples of installations for triggering: security PCs, management offices, site managers, etc.
Examples of installations for detailed alert information: open-plan offices, conference rooms, company cafeterias, etc.
Scrolling messages such as:
- "ATTACK ALERT – INTRUSION IN THE GROUND FLOOR LOBBY, EVACUATE TO THE OPPOSITE SIDE OF THE BUILDING"
- "MAJOR RISK – ENTER THE CONTAINMENT ROOM"
IT IS EQUIPPED WITH:
- 4 fully customizable buttons for your alert scenarios
- with a light flash identical to that of the Hestia+ siren
- a screen displaying a clear, personalized message depending on the alert scenario triggered (scrolling text system)
Coming soon
The final design may vary before it becomes available. Image not contractually binding.
SOS button
Keeper alert button
The KEEPER alert button is connected to the SecurIT SOS mobile app via Bluetooth.
- Simplifies triggering the SecurIT SOS mobile app alert
- Low-energy Bluetooth technology
- Lightweight: it weighs only 23 grams
- Mobile and discreet
- Continuous update via radio link (OTA)
- Easily replaceable battery (CR 2024)
- nRF52 series ultra-low power chipset
- Handling of distribution 5url
Coming soon
The final design may vary before it becomes available. Image not contractually binding.
SOS button
SecurIT SOS App
Our mobile app is the perfect PTI alert solution for workers equipped with business smartphones. Unlike traditional apps, our app works without additional installation, tracking, or unwanted listening. Users can manually or automatically ( in 2024) trigger an alert in an emergency situation. The alert chain is the same as on our Athena+ PTI beacons, ensuring a rapid and effective response.
It is also compatible with our safety plan solutions (PPMS/POMSE).
The SecurIT SOS app can also be paired with a Keeper alert button for optimal effectiveness.
- Automatic disconnection of the smartphone following activation
- Manual alert
- Automatic alert
- Geolocation of the user at the time of the alert
Available
Secure administration interface
The secure administration interface is accessible via your web browser (SaaS) and allows you to manage your ATHENA+ fleet.
Supervision
Administrators will be able to view and modify facility information, view beacon self-tests, geolocate mobile devices in your fleet, and view and track alerts issued across all city sites.
Alerts
Manage and customize various alerts (intrusion/attacks, major risks (industrial, natural, health), fire, serious incivility, etc.).
Configure alerts to be sent to one or more sites.
Available
Products
Locate a tag during an alert or when it is lost
Plan an exercise independently
Customize your alerts
Report on uncharged tags
Reassign a tag or mobile app license when there is a change in personnel
WEBSITE
Download information from your site.
Assault Alerts (automatic activation)
Only trigger the alert when it is confirmed.
Say STOP to false alarms and alerts.
Thanks to the Athena+ DATI beacon, you can be sure that the alert will only be triggered when there is a real risk.
DATI options configurable via the interface:
- Option to enable and disable automatic triggering.
- Three types of autonomous triggers that can be combined: fall detection, loss of verticality, and prolonged immobility.
- The beacon wearer can cancel the autonomous alert.
My Keeper recognized by an ecosystem of experts...
Join the thousands of people we protect every day.
We will respond as soon as possible. You can also call us at +33 (0)4 83 43 20 32.
Already a customer? Contact our support team at support@mykeeper.fr.
